FRP Bypass Apk 2019 Latest Version Download [100% Working]

With the launch of Android Lollipop, Google has now brought a new feature for everyone. You might have heard about the ‘Factory Reset Protection.’ This feature is helpful in security user’s private data. This feature is also beneficial when your phone gets misplaced or stolen. You do not need to worry even a little. The frp bypass apk can help you disengage the lock.

Most of the times the user of Samsung j3 face account verification issue. But if you have some other device like LG, you can also face the FRP Bypass problem when you forget your Google account details. There is no doubt that the FRP Bypass tool can help you a lot in unlocking your device easily. Tungkick is the first developer of the tool that can help you deactivate the lock.

What is Google FRP Bypass APK ?

The FRP Bypass is a security patch developed by Google. The FRP Bypass helps you in protecting your device in case if it gets misplaced or stolen. You will have to have access to the Google account; therefore nobody will be able to FRP Bypass. This feature was introduced for the devices like Samsung, LG or a lot of others. There is no doubt that the FRP Bypass is a fantastic feature, but it causes a lot of trouble if the user forgets the password of the Google account. You can download the very easily but make sure that the source you are using is trustworthy.

Download FRP Bypass APK

FRP Bypass

FRP Bypass with OTG :

The following are a few steps that can help you to successfully FRP Bypass with OTG:

  • To start with you will have to download frp bypass apk from our website.
  • Once the downloading is finished, copy the apk files on a USB drive.
  • After copying the file run the device on which you are facing the FRP Bypass
  • A setup wizard will appear where you will have to follow a few instructions.
  • Once the FRP Bypass screen opens, you will have to enter your Google account login details.
  • But if you have misplaced or lost your smartphone, you will have to figure something else out.
  • Now using your OTG cable, you’ll have to connect your USB drive to the android device.


  • After that, you’ll see a file explorer appearing on the phone. Open the folder on the device where you have already saved your frp bypass apk
  • During the installation, the device will block the installation, and you might see some unidentified source issue/error. If that happens then go to the device settings and turn the unknown sources option on.

FRP Bypass

  • Now tap on the installation button over to begin the installation.
  • After the installation is finished, tap on open and the settings menu will open.
  • In the opened settings menu scroll down, choose backup and reset option. Then tap on the factory data reset and tap the confirm button.


That’s all!! You’re successfully done with the FRP Bypass on the android device. Now you’ll have to restart the device, and you won’t face the FRP Bypass problem any longer. After rebooting the device, it’s up to you to add the Google account credentials or skip it.

FRP Bypass without OTG :

Here is another fantastic method to bypass verifying the account window on your Samsung devices without making use of your OTG cable. This technique is also executed with the assistance of FRP Bypass tool but rather than making use of your OTG cable; we will have to use a working PC. Here’s what you will need to do:

  • First, download the FRP Bypass tool and Realterm on the PC.
  • You are required to install the Realterm program/software on your system before proceeding ahead.

  • Once the installation is done, connect the android device to the computer and run the Realterm program/software.
  • Now right click on My Computer > click on Device manager. Now click on Modems > Samsung Mobile USB modem. To see your device’s port number, double-click for reaching the properties.

  • Register your port number cautiously as you’ll need it to be fed in the Realterm before hitting the Change button.


  • Now make sure to change the display settings as well.

Display setting FRP

  • On this final step where you will have to enter ‘at+creg?\r\n’ and click the Send button.

  • If this technique does not go great, ‘enter ‘atd1234;\r\n’ in and click Send ASCII button.

  • You can keep on doing the step again and again till the time dialer pad appears on the Samsung device.

This technique seems time-consuming and tedious, but once you get on with it, it is extremely helpful to you to successfully get over with the FRP Bypass problem.

FRP bypass without ADB, OTG or PC :

You should pursue this FRP Bypass technique first if in case you do not get luck with it. You can also try the methods mentioned above. But before starting make sure you have the following things:

  • Wi-Fi Connection
  • Active SIM-Card
  • Phone battery should be more than sixty percent

Now reboot the android device and follow the following steps For FRP Bypass :

  • Tap on Start then select connect to the Wi-Fi network. Then tap Next and then tap on Agree after reading the terms and conditions that apply.
  • When you see verify your account page, you will have to dial the SIM number utilizing any other phone. After this, you will have to wait until a pop-up appears on the screen. Once the pop-up appears, tap on Save. Then tap the three dos that can be seen on the upper right corner of the screen > Send Message.
  • Now in the opened page, type in > SEND. It’ll make the message a hyperlink which will then assist you to open the browser. Now tap the link.
  • Once you have tapped the hyperlink, YouTube page will open. In the opened page open Account > Settings > About.
  • Now select Google Privacy Policy. It’ll open up the browser. Now type “” in the URL bar.
  • Then keep scrolling down till you see “All Samsung Account Bypass” heading > download Apex Launcher APK 2018.
  • Once downloading is finished, install the app. In the “Samsung Internet” pop-up, tap Settings to move further > tap on “Allow from this source” > and return to the install Apex Launcher when the app gets installed tap on Open. It‘ll take you to your home screen. Open your phone Settings now.
  • Inside the opened menu, select About Phone > Software Information > on Build Number, tap eight to nine times. After that, return to the Menu and open the browser.
  • Now again keep scrolling down till you see the Google Account Manager (7.1.1) heading > tap to download it. After downloading, install the app and then tap DONE when the installation is finished.
  • Now you will have to download apk And to download it simply scroll down to your screen and when the Account Login APK can be seen click the download button > tap install for staring the installation of your apk into the android device > OPEN.
  • Now in the opened page tap the three dots that can be seen on the upper right corner of the screen > Browser Sign-in > OK.
  • Luckily, you can now add your own Google account credentials to the android phone. It’ll also remove the account verification page, and it’ll be rewritten by the new Google account. So, log in with the Google account by typing the Email ID and Password. Once the process of logging in is done, reboot the device.
  • Once the device rebooted, you have to finish the initial setup. You will now see the Account Added page. It means, you’ve successfully deactivated the FRP lock utilizing the frp bypass apk and your Google account has also been added to the device.

Custom Binary Lock by FRP Bypass Fix :

The custom binary lock can automatically get applied when the user roots his/her Samsung device. It means that the FRP Bypass will get activated by default. So the access to the phone custom recovery also gets blocked. You will need to pursue the instructions given below if you are facing a similar problem. But first, make sure you have a working PC and also have Odin 3 download. Now let’s get onto the steps:

  • First you will have to download the Odin 3 and apk. Once the downloading is finished, unzip the file and install it.
  • After installing the tool, you will need to pick the Samsung device and hold the home button, the volume keys, and power button.
  • After doing that you will receive a notification of up gradation of the system software. You will need to hold the volume up button for going to the software updates option.
  • Now open the Odin 3 and connect the device with your working system.
  • Once the device gets detected automatically, you will have to choose the zip files from the file you have already downloaded.
  • Next hit the start button and device software version upgrade will begin. Once all of this is done, you have to disconnect the device and reboot it.
  • Keep one thing in mind; let the system upgrade install the essential stuff, and for that, you will have to wait for a few minutes.

Utilizing this method, you will be capable of unblocking the FRP Bypass lock. That is all about it!! The custom binary FRP Bypass lock issue gets fixed.

FRP Bypass Tool List:

Now let’s have a glimpse of the best working FRP Bypass tools:

  • The frp bypass apk download for the Android device
  • Google verification FRP Bypass tool
  • GSM flasher ADB Bypass tool
  • Remote Google account FRP Bypass removal
  • Pangu Bypass tool
  • Working Google account / FRP Bypass and flashing
  • Samsung FRP helper v0.2
  • FRP Bypass solutions
  • D&G password unlocker
  • Android lock screen removal tool for Bypassing lock screen